DFW Well Service
A DFW Well Service driller answering an incoming call on the job site, hands still dirty from the rig

We answer the phone.

When you call, you’ll get a real person — often Matt Muller himself, not a machine. We stay in touch because it’s the right way to do business, and we show up when we say we will.

Call (940) 536-8560 or send a message

Water Well Drilling & Pump Repair in Newark, TX | DFW Well Service

Service Area Overview

Licensed well drilling and pump service in Newark, TX and southeastern Wise County, reaching the Trinity aquifer's Paluxy and Twin Mountains sands.

Services We Provide in Newark

DFW Well Service crew running a water well drilling rig near Newark, TX

DFW Well Service (TDLR License #61234 DKMPW) provides water well drilling, pump service, and all related well work for residential and rural customers in Newark and southeastern Wise County.

Here in southeastern Wise County the Trinity’s layers stay more distinct than elsewhere in the county — near the Tarrant and Parker County lines the full Paluxy, Glen Rose, and Twin Mountains stack is usually still intact, with the Glen Rose limestone separating the two producing sands, whereas central and northern Wise lose the Glen Rose and those sands merge into the Antlers Formation. There’s no single typical depth — it varies by parcel and by which sand the well targets — and we handle the Upper Trinity GCD permitting, including registering the exempt domestic and livestock wells that must still be filed before drilling begins.

Well Depth & Geology in the Newark Area

Isometric geological cross-section cube illustration showing Wise County, Texas stratigraphy — Topsoil, Alluvial deposits (localized along major drainages), Comanche Peak / Walnut limestone cap, Paluxy Formation (southern Wise County) / upper Antlers (central and northern Wise County), Glen Rose Formation (eastern Wise County only), Twin Mountains Formation (southern Wise County) / lower Antlers (central and northern Wise County), and the Trinity (Antlers — Paluxy/Twin Mountains coalescence in central/northern Wise County; Paluxy/Glen Rose/Twin Mountains stack in southern Wise County) aquifer at the base.

About this diagram

This cross-section shows the rock layers beneath Newark from topsoil down to the Trinity aquifer system.

Tap any layer in the cube — or in the list below — to see what it is and what it means for drilling a well here.

  1. Topsoil — West Cross Timbers
    0–20 ft
  2. Antlers Formation
    outcrop / shallow confined — varies
Tap or hover a layer in the cube to see what's beneath the surface here.

This shows the layer stack typical of the Newark area. The exact formations and depths under a specific property vary — see the details above.

Explore the full Wise County geology →

Primary Aquifer
Trinity (Antlers — Paluxy/Twin Mountains coalescence in central/northern Wise County; Paluxy/Glen Rose/Twin Mountains stack in southern Wise County)

Secondary: Cross Timbers Aquifer (Pennsylvanian/Permian — significant in west-central Wise County)

Typical Well Depth
Varies by location

We estimate from nearby well records

Groundwater District
Upper Trinity GCD
Confinement
outcrop / shallow confined — Wise County sits on the geological boundary line where the Glen Rose Formation thins to extinction

Wise County overview → Permit & regulations → TDLR License #61234 DKMPW Updated August 6, 2026

Wells around Newark draw from the Trinity aquifer, and southeastern Wise County keeps the layers more distinct than the rest of the county. Near the Tarrant and Parker County lines, the full Paluxy / Glen Rose / Twin Mountains stack is usually still intact here — unlike central and northern Wise, where the Glen Rose thins to nothing and those sands merge into the Antlers Formation. There’s no single typical depth: it varies by parcel and by which layer the well targets.

The rural community around Newark includes longtime farming and ranching families alongside newer rural residents commuting toward Fort Worth. Both depend on private wells, and the area has a long history of successful Trinity aquifer completions.

Wise County Permit Requirements

All new water wells in Wise County, including the Newark area, must be permitted through TDLR and the Upper Trinity Groundwater Conservation District. The district requires pre-drilling permits and post-completion well reports, and even exempt domestic and livestock wells must be registered. The district also sets spacing distances from neighboring wells and property lines, while TDLR construction standards govern separation distances from septic systems.

See our full guide to Wise County water well regulations for more information.

For a free estimate on well drilling or pump repair near Newark, call DFW Well Service at (940) 536-8560. We work throughout Wise County and will give you straightforward answers and honest pricing before any work begins.

Frequently Asked Questions

Does Newark have city water, or do properties use wells?
Newark has a small municipal system, but many properties on the rural edges of this southeastern corner of Wise County — out toward Boyd, Rhome, and the county lines — rely on private water wells for household and livestock water.
How deep will a well need to be near Newark?
There's no single typical depth around Newark — it varies by parcel and by which sand the well targets, so we review the driller's logs from neighboring wells before quoting. Newark sits in southeastern Wise County, where the full Paluxy / Glen Rose / Twin Mountains stack is usually still intact — unlike central and northern Wise, where the Glen Rose pinches out and those sands merge into the Antlers. Which layer your well completes in depends on the parcel.
What aquifer serves Newark?
Newark-area wells draw on the Trinity aquifer through the Paluxy and Twin Mountains sands. In this southeastern part of Wise County the Glen Rose Limestone still separates the two, whereas farther north and west it disappears and the sands coalesce into the Antlers Formation. The Trinity is a reliable regional aquifer across north-central Texas.
What does well drilling cost near Newark?
Wise County drilling costs typically run $38–$50 per foot. Total cost depends on completion depth and the full system — casing, pump, pressure tank, and electrical work. We provide a free itemized written estimate after reviewing neighboring driller's logs for your parcel.
Do I need a permit to drill a well in Wise County?
Yes. Wells in Wise County require permits from TDLR and the Upper Trinity Groundwater Conservation District, and even exempt domestic and livestock wells must be registered before drilling begins. We take care of the permit process and file the required completion report.
Can you rehabilitate an older well near Newark that has lost yield?
Often, yes. Many older wells in Wise County slow down from mineral buildup or pump wear rather than a failed aquifer. We offer well rehabilitation — hydro-jetting, redevelopment, and pump replacement — that can restore yield without the cost of drilling a new well. We assess each well individually before recommending it.
Is the well water in Newark salty or brackish?
Mostly fresh. Newark's Trinity (the Paluxy and Twin Mountains sand) is generally fresh, but the Texas Water Development Board found slightly-salty water in the Twin Mountains basal sand on the shallower, western side of the county — toward where it nears the surface — and the older Cross Timbers rock in western Wise County can be mineralized. A total-dissolved-solids test (a measure of how mineral-heavy the water is) is worth it on wells in the western part of the county.

Other cities we serve

Our crews cover Newark and communities across our 19-county North Texas service area.

In Wise County

Elsewhere in North Texas

See all of Wise County
DFW Well Service

Our Reliability Runs Deep

Licensed

TDLR License #61234 DKMPW

Oklahoma License DPC-1042 (Operator #OP-2530)

Request Service

Tell us about the property and what you need help with.

Fields marked * are required.