Water Well Drilling & Pump Repair in Bluff Dale, TX | DFW Well Service
Service Area Overview
Licensed well drilling and pump service in Bluff Dale, TX, reaching the Trinity aquifer's Paluxy and Twin Mountains sands; depth varies by parcel.
Services We Provide in Bluff Dale
DFW Well Service (TDLR License #61234 DKMPW) is a licensed well contractor serving Bluff Dale and Erath County with residential, ranch, and agricultural water well services.
Well Depth & Geology in Bluff Dale Area
Tap any layer in the cube — or in the list below — to see what it is and what it means for drilling a well here.
- Topsoil — Post Oak / Cross Timbers0–20 ft
- Comanche Peak / Walnut limestone cap20–60 ft
- Paluxy (Upper Trinity sand)shallow to moderate where present
- Glen Rose (Middle Trinity)varies
This cross-section shows the layer stack typical of Erath County. The exact formations and depths under a specific Bluff Dale-area property vary — see the details above.
- Primary Aquifer
- Trinity
- Typical Well Depth
- Varies by location
- Groundwater District
- Middle Trinity GCD
- Confinement
- outcrop / near-outcrop transition county
Secondary: Brazos River Alluvium (TWDB minor aquifer)
We estimate from nearby well records
Erath County overview → Permit & regulations → TDLR License #61234 DKMPW Updated August 6, 2026
Wells around Bluff Dale draw from the Trinity aquifer. The Trinity’s main sand layers here are the Paluxy nearer the surface and the deeper Twin Mountains basal sand; local and district planning materials also break the Trinity into several other named units (Glen Rose, Travis Peak, Hensell, Pearsall, Hosston, and — where the Glen Rose thins — the Antlers), but for a homeowner it’s all one Trinity system. The strongest verified local depth anchor is the TWDB/MTGCD monitor well south of Stephenville on US Highway 281 (well #3155504): 332 feet deep, completed in the Twin Mountains sand, and tracked continuously since February 2000, with only about 11 feet of water-level decline over 26 years.
Bluff Dale and the surrounding northeastern Erath County countryside are farm and ranch country, where private wells serve homesteads, pasture, and livestock. Well service calls in this area range from historic farmstead wells needing rehabilitation to new wells for recently purchased acreage.
Erath County Permit Requirements
All water wells in Bluff Dale and Erath County must be permitted through the Middle Trinity Groundwater Conservation District and TDLR. The Middle Trinity GCD requires a permit before drilling and a well completion report afterward. Agricultural wells may have additional yield-reporting requirements.
For more detail, see our guide to Erath County water well regulations.
Call DFW Well Service at (940) 536-8560 for a free estimate on any well project in the Bluff Dale area. We serve all of Erath County and are experienced with both the Middle Trinity GCD permit process and the area’s formation characteristics.