Need well service in Colleyville?

DFW Well Service helps property owners with water well drilling, pump service, inspections, and related well issues across North Texas.

Water Well Drilling & Pump Repair in Colleyville, TX | DFW Well Service

Service Area Overview

Licensed well drilling and pump service in Colleyville and northeast Tarrant County, reaching the deep, confined Trinity where a private well is the exception.

Services We Provide in Colleyville

DFW Well Service (TDLR License #61234 DKMPW) provides full-service water well solutions in Colleyville and across northeast Tarrant County. Our licensed team handles everything from new well drilling to routine pump maintenance for the estate lots and outlying properties where private wells are still in use.

Well Depth & Geology in Colleyville Area

Isometric geological cross-section cube illustration showing Tarrant County, Texas stratigraphy — Topsoil, Quaternary alluvium (Trinity River corridor), Eagle Ford (undifferentiated), Washita Group (Grayson, Mainstreet, PawPaw, Weno, Denton, Fort Worth, Duck Creek), Fredericksburg Group (Kiamichi, Edwards, Comanche Peak, Walnut), Paluxy Formation (Trinity upper unit), Glen Rose Formation, Twin Mountains Formation (with Hensell, Pearsall, Hosston subdivisions), and the Trinity (Paluxy / Twin Mountains, separated by Glen Rose confining unit) aquifer at the base.

Tap any layer in the cube — or in the list below — to see what it is and what it means for drilling a well here.

  1. Topsoil — Blackland Prairie / urban context
    0–10 ft
  2. Austin Chalk
    10–250 ft
  3. Eagle Ford Shale
    250–300 ft
  4. Paluxy Formation
    300–600 ft
  5. Glen Rose Formation
    600–800 ft
Tap or hover a layer in the cube to see what's beneath the surface here.

This cross-section shows the layer stack typical of Tarrant County. The exact formations and depths under a specific Colleyville-area property vary — see the details above.

Explore the full Tarrant County geology →

Primary Aquifer
Trinity (Paluxy / Twin Mountains, separated by Glen Rose confining unit)

Secondary: Woodbine (eastern Tarrant County only)

Typical Well Depth
Varies by location

We estimate from nearby well records

Groundwater District
Northern Trinity GCD
Confinement
deep confined across most of Tarrant County; limited Trinity outcrop in the far northwestern corner

Tarrant County overview → Permit & regulations → TDLR License #61234 DKMPW Updated August 6, 2026

Colleyville sits in northeast Tarrant County, between Grapevine and Southlake, and is one of the most fully built-out suburbs in the area. Nearly every home is on municipal water; the private wells that remain are on larger estate lots or serve irrigation. It is worth being clear about the geology: the limited Trinity outcrop in Tarrant County is confined to the far northwestern corner, and here on the eastern side of the county the Trinity is deep and confined — among the deepest anywhere in Tarrant.

Wells here target the Trinity aquifer. Up high is the Paluxy Formation, a sand-dominant unit that lies at or near the surface only in the far northwest corner and deepens toward the east — countywide the Paluxy runs from surface to roughly 1,000 feet. Beneath it, separated by the Glen Rose limestone — which acts as a confining layer here, not a producer — are the Twin Mountains sands, the most productive Trinity unit, sitting roughly 500 to 2,000 feet and also deepening eastward. A minor Woodbine aquifer is present in the eastern Tarrant suburbs and supplies some household and livestock water, but its yields are lower and its water poorer than the Trinity.

Tarrant County Permit Requirements

Water wells in Colleyville and Tarrant County fall under the Northern Trinity Groundwater Conservation District (NTGCD), a single-county district created in 2007. A typical domestic household well — one not capable of producing more than 17.36 gallons per minute and used for household, livestock, or agricultural purposes — is exempt from permitting, metering, and production fees. Even so, every well drilled in the county must still be registered with the district. Larger, non-exempt wells require a permit before drilling. Our guide to Tarrant County water well regulations walks through the full process.

DFW Well Service handles the NTGCD registration and any permitting as part of your project. Call (940) 536-8560 for a free estimate on a new well or any pump and service work in Colleyville or anywhere in Tarrant County.

Frequently Asked Questions

Are homes in Colleyville on city water or private wells?
Almost all of Colleyville is on municipal water. Colleyville is an affluent, built-out suburb in northeast Tarrant County, between Grapevine and Southlake, and the city is served by utility water rather than groundwater. Private wells here are the exception — found on a few larger estate lots or used for irrigation — rather than the rule. Where a well does make sense, the Trinity under this part of the county is deep and confined.
What aquifer do wells near Colleyville tap into?
The Trinity aquifer. Colleyville sits on the eastern side of Tarrant County, where Trinity depths are among the greatest in the county: the upper Paluxy sand, the Glen Rose limestone acting as a confining layer, and beneath it the Twin Mountains sands — the most productive Trinity unit. A minor Woodbine aquifer is also present in eastern Tarrant, but it is poorer and higher in iron than the Trinity.
How deep do wells go around Colleyville?
It varies with target and location, and Trinity depths increase from west to east across Tarrant County — so Colleyville, on the eastern side, sits toward the deeper end. Countywide the Paluxy runs from at or near surface in the far northwest down toward about 1,000 feet, and the Twin Mountains sands sit roughly 500 to 2,000 feet. We estimate your likely depth from nearby driller's logs before quoting.
Do I need a permit to drill a well in Tarrant County?
Tarrant County is covered by the Northern Trinity Groundwater Conservation District (NTGCD). A typical domestic household well producing under 17.36 gallons per minute is exempt from permitting, metering, and fees — but every well drilled in the county must still be registered with the district. Larger, non-exempt wells require a permit before drilling. We handle the registration and any permitting.
What is the water quality like in Colleyville-area wells?
Trinity water in Tarrant County is generally good — typically fresh, with low dissolved solids — which is why the Trinity is the preferred target. It is usually hard, so most homeowners run a softener. The eastern-Tarrant Woodbine is the poorer unit: higher in iron, and fresh only to about 1,500 feet of well depth before turning slightly to moderately salty below that. A post-drilling water test confirms what your specific well needs.
What does it cost to drill a well near Colleyville?
Cost depends on completion depth, casing, and which Trinity sand you finish in — and because the Trinity is deeper and confined under eastern Tarrant County than in the shallow northwest corner, wells here run deeper. We give a free written estimate after reviewing your parcel and nearby logs.
Can DFW Well Service repair my pump in Colleyville?
Yes. Colleyville and the surrounding northeast Tarrant County area are in our service area. Call (940) 536-8560 and describe the symptoms — no water, low pressure, or a pump that will not stop cycling — and we will get a technician out.

Other cities we serve

Our crews cover Colleyville and communities across our 19-county North Texas service area.

See all of Tarrant County
DFW Well Service

Our Reliability Runs Deep

Licensed

TDLR License #61234 DKMPW

Oklahoma License DPC-1042 (Operator #OP-2530)

Request Service

Tell us about the property and what you need help with.

Fields marked * are required.